Vacuubrand PC 610 NT CVC 3000 VMS Module Chemistry Vacuum Pumpstand Pump Stand

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

MT 4 passive container manufactured by B Medical Systems The special transport containers of B Medic (more)al Systems are made of polyethylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates Insulation: 23-27 mm Storage capacity (gross volume of bags): 4 (450 ml) / 6 (270 ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outdoors: up to 46 h at 43°C outdoors: up to 32.5 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CS 120 PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extractor cov (more)er and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3+3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation